Lightware Visual Engineering is a leading manufacturer of DVI, HDMI and DisplayPort matrix switchers, signal extenders and accessories for the professional AV market. Our goal is to recognize industry needs and develop performance-rich products of the highest quality by continuously consulting with integrators, rental technicians and design engineers.
High Fidelity Signal Management.
All Lightware products utilize pixel-by-pixel signal transmission between endpoints. The lack of latency and compression ensures that the signal keep its original quality. This is achieved by employing such proprietary Lightware technologies as Pixel Accurate Reclocking and Single Fiber Technology.
Research and Development.
Lightware technology incorporates numerous professional features developed by our R+D centre in Budapest. These features are Lightware’s own intellectual property and some have now become industry standards. Lightware products are solely designed, developed and manufactured in Hungary in the European Union.
Training and Education.
Lightware Visual Engineering organizes educational seminars designed to provide an insight into the specifics, pitfalls and best practices when integrating the major digital video formats. At these events Lightware trainers and present a deep insight of the digital standards and their application.
PRC-16-312 is a rack mount cage accessory enclosing up to 16 pieces of HDMI-TPX or HDMI-TPS units with 12V DC input in any combination, also providing power source for every installed device.
Reliable, safe and secure operation is assured by numerous built-in protections against short circuits and overloads.
Highlighted Features:
- 3RU size rack mount cage with built-in power supply for 16 extenders
- Short circuit and overload protection
- Silent front-to-rear cooling system with temperature control
Features:
- Universal full-range AC input with a standard C14 socket
- Users can easily install and remove the supported devices and mix encoders and decoders in any combination
- Supported units can also be installed in the PRC-16-312 reversed
- Powering port protection: in case a power port fails, the rest of the devices keep going
- Makes installation easy and clean for 16 small extenders in the rack
- Multiple mounting options to suit different rack cabling layouts
- Reliable cable management with supplied cable guide rails
- 3 years warranty
Lightware is announcing the arrival of HDMI-3D-OPT-DD series extenders that offer data diode technology, which means that an optical fiber with a sender on one side and a receiver on the other ensures that data can only be transferred in a forward direction, and never in reverse.
This means is no two-way transfer, preventing leakage and manipulation from taking place.
HDMI-3D-OPT-TX210DD and HDMI-3D-OPT-RX110DD extend HDMI 1.4, DVI 1.0 over one multimode fiber and transmit video signal with embedded audio to a distance of up to 2500 meters.
Two New MMX Matrix Switcher Models are Available
Lightware is announcing the arrival of two new devices in its MMX product family lineup, which are MMX8x8-HT440 and MMX8x8-HT080 specifically designed for conference room environment.
The products receive and transmit digital video, audio and control to distances of up to 170 m over a single CAT6 cable. With the advanced EDID Management on board of MMX8x8-HT440 and MMX8x8-HT080, the required resolution from any video source and the output conformity to the system requirements are available. The units can be controlled via RS-232, Ethernet or USB ports, and they also offer Ethernet, RS-232, Serial and IR command injection capabilities, allowing to send any control command directly from the LAN connection to remote endpoints.
MMX8x8-HT440 is a standalone matrix switcher specifically designed for conference room environments. It has four HDMI and four TPS2 (HDBaseTTM) inputs with four HDMI outputs and four TPS2 outputs. 4K/UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0), 3D capabilities and HDCP are fully supported.
The device also has eight balanced 5-pole Phoenix audio connectors at four of the TPS2 and HDMI inputs, four of the TPS2 and HDMI outputs.
MMX8x8-HT080 is a standalone matrix switcher specifically designed for conference room environments. It has eight HDMI inputs with eight TPS2 outputs. 4K/UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0), 3D capabilities and HDCP are fully supported.
The device also has eight balanced 5-pole Phoenix audio connectors at four of the inputs, four of the outputs.
PoE 48V remote powering is available on every output TPS2 ports for cost-effective installations.
HDMI20-OPTJ-RX90 – Full 4K HDMI 2.0 Compatible Fiber Optical Extender
The HDMI20-OPTJ-TX90 and HDMI20-OPTJ-RX90 are HDMI 2.0 compatible optical fiber extenders.These units transfer uncompressed HDMI 2.0 class 4K signals with embedded audio to up to 600m or a FullHD signal up to 2500m distance over one MultiMode fiber cable.
Highlighted features:
– Single Fiber Technology
– Uncompressed video up to 18 Gbps datarate (600 MHz pixel clock)
– 4096×2160@60Hz/4:4:4 maximum resolution (600MHz)
– Solid machined aluminum body
HDMI20-OPTJ-TX90 – Full 4K HDMI 2.0 Compatible Fiber Optical Extender
The HDMI20-OPTJ-TX90 and HDMI20-OPTJ-RX90 are HDMI 2.0 compatible optical fiber extenders. These units transfer uncompressed HDMI 2.0 class 4K signals with embedded audio to up to 600m or a FullHD signal up to 2500m distance over one MultiMode fiber cable.
Highlighted features:
– Single Fiber Technology
– Uncompressed video up to 18 Gbps datarate (600 MHz pixel clock)
– 4096×2160@60Hz/4:4:4 maximum resolution (600MHz)
– Solid machined aluminum body
Welcome to the upcoming Lightware Visual Engineering webinar series that revolves around USB-C technology and learn more about how to use it to bring your AV operation to the next level.
